Where it goes
Automotive interiors and trim: seat backs, parcel shelves, floor mats and door cards, where the fastener has to survive heat cycling and repeated service removal.
It is also used on moulded panels where a woven tape would not hold its shape.
Specification
| Model | VC-373 |
|---|---|
| Material | Nylon |
| Colour | black, white, or matched to your Pantone reference |
| Minimum order | 500 m for stock shades, 3,000 m for a custom dye lot |
| Sampling & lead time | Samples in 7 days; bulk 2-3 weeks after the lab dip is approved |
| Slitting tolerance | ±0.5 mm on slit width |
| Certification | SGS, Oeko-Tex Standard 100, ISO 9001 |
| Packing | Polybag inside export carton; retail-ready packing on request |
| Origin | Xiamen, Fujian, China |
Processing options
- Weldable backing — PP-compatible carrier for ultrasonic or heat staking onto a moulded shell.
- Profiled outline — the part can be moulded to a shape, with holes and locating features in the same shot.
- Colour at the mould — pigmented in the tool, so the colour runs through the part and cannot rub off.
- Strip or part — supplied as continuous strip, or as individual moulded parts.
Quality control
Moulded parts are checked for hook height, density, backing thickness and closure force. A sample is cycled to the agreed number of open/close cycles before the lot is released.
Common questions
What is the minimum order? 500 m for stock shades and 3,000 m for a custom dye lot. Smaller trial quantities from stock widths are possible — tell us the width and the annual volume.
How long does it take? Samples ship in 7 days. Bulk runs take 2-3 weeks after the lab dip is approved.
What tolerance do you hold on slit width? ±0.5 mm. If your line needs a tighter band, say so when you send the drawing — it changes how the roll is wound, not just how it is cut.
Can you match a sample we already use? Yes. Send the sample or the peel and shear figures you work to. And We will match the construction and the closure force rather than just the colour.



