Where it goes
Typical surfaces are painted steel, aluminium, powder coat, ABS, acrylic, glass and sealed timber. The adhesive has to match the surface energy of the substrate. So We ask for the material before quoting.
For low-energy plastics and PP/PE, a primer or a different adhesive system is specified instead of a standard acrylic.
Specification
| Model | VC-313 |
|---|---|
| Material | 100% Nylon |
| Width | 38 mm (other widths to order) |
| Colour | black, white, or matched to your Pantone reference |
| Minimum order | 500 m for stock shades, 3,000 m for a custom dye lot |
| Sampling & lead time | Samples in 7 days; bulk 2-3 weeks after the lab dip is approved |
| Slitting tolerance | ±0.5 mm on slit width |
| Certification | SGS, Oeko-Tex Standard 100, ISO 9001 |
| Packing | Polybag inside export carton; retail-ready packing on request |
| Origin | Xiamen, Fujian, China |
Processing options
- Adhesive matching — the grade is chosen against the substrate and the service temperature, not picked from a catalogue default.
- Coating weight — heavier where the surface is textured or the part is large.
- Liner selection — paper or film, scored or tabbed, so the liner releases cleanly on your applicator.
- Converting — slit to ±0.5 mm, sheeted, or die-cut to a part.
Quality control
Each lot is checked for coat weight, liner release force, width and initial tack. Where the customer supplies a substrate sample, the bond is tested on that surface before the run is released.
Common questions
What is the minimum order? 500 m for stock shades and 3,000 m for a custom dye lot. Smaller trial quantities from stock widths are possible — tell us the width and the annual volume.
How long does it take? Samples ship in 7 days. Bulk runs take 2-3 weeks after the lab dip is approved.
What tolerance do you hold on slit width? ±0.5 mm. If your line needs a tighter band, say so when you send the drawing — it changes how the roll is wound, not just how it is cut.
Can you match a sample we already use? Yes. Send the sample or the peel and shear figures you work to. And We will match the construction and the closure force rather than just the colour.
